Stazione saldante con aspirafumi, pistola dissaldante ad aspirazione e pistola ad
aria calda professionale lead-free e smoke-free.
Punta del saldatore in dotazione LF-2B - R0,5x10mm
Flusso massimo: 19 Litri/minuto
Non-contact soldering for high requirements.
The hot air gun is equipped with a temperature limiting feature to only allow
a temperature rise of 3 degrees per second. This is in accordance with the industry
standard allowable temperature rise time to prevent damage to sensitive components.
The air volume and the temperature can be set or adjusted in a wide range, the nozzles
can be easily replaced so that each component is soldered by using the suitable
nozzle, air and temperature setting. Heating elements and nozzles conform to international
standard; suitable for the most SMD components, for instance LEDs, SOIC, CHIP, QFP,
PLCC and BGA.
The Aoyue 2703A+ is a CPU controlled Rework station. It unites all advantaged and
functions of a hot air soldering station, solder station, fume extraction unit and
desoldering gun in one unit. The 2703A+ has a Dual Port System that allows the user
to employ simultaneously the lead-free soldering iron as well as the desoldering
gun. Additionally the rework station can use the new generation of BGA hot air nozzles
that allow a more effective reflow process on account of better air and heat dispersion.
With these Multi-Chamber BGA nozzles the rework of large BGAs (CPU, GPUs) can be
carried out more efficiently. Another function of the station is the Aoyue Auto
Cooling Function, it blows cold air on the heating element when the hot air is switched
off until reaching a low temperature in order to extend the life of the heating
element.
The station is delivered with a transport safety (a red cross screw that secures
the pump during transport), this must be removed before using the
station for the first time! After removing the safety transport the station is fully
operational. You need only 5 minutes to remove the red cross screw and then you
have a functional station. The temperature and the air flow can be adjusted via
"AIR" and "Heater".
PS. il grasso siliconico eve essere utilizzato per ungere le parti in gomma nella
sezione cartuccia per ottimizzare la tenuta in aspirazione e facilitare il montaggio/smontaggio